For several years, an unusual project was developed by engineers from the Likhny ax workshop. Experts said that they do not plan serial production of a hybrid machine. To legalize a car for operation on the roads of Belarus, it will take about 20 thousand dollars (about 1.8 million rubles at the current rate).
Four engineers worked on the creation of an unusual car. The cost of a custom project, which was implemented for several years, amounted to 120 thousand dollars (about 10.7 million rubles at the current rate). The engineers took the BMW 6 Series with a 330-horsepower engine. Specialists designed body parts from Bugatti and GAZ-21 on the computer, and then made fiberglass. At the same time, the chrome elements from the Volga enthusiasts restored.
Dashing ax / youtube
The head of the workshop, Alexander Borisevich, said that the Volgatti project was created exclusively for the sake of interest, so the developers do not plan to launch a custom car into a series. At the same time, in order to allow the car on the Belarusian roads, you will need to put a home -made vehicle for registration. The procedure will require about 20 thousand dollars (about 1.8 million rubles).
Last May, the Dagestan tuners built a hybrid Mercedes-Benz E-Class and Gelendvagen. The craftsmen installed the front of the SUV on the sedan.
Autoetro in French manner
A bird with a traumatic brain injury was found on a busy roadway. This was…
The anti-rating compiled by WhatCar included only cars from the premium segment. Each car was…
The incident occurred in the Leninsky district on Agalakova Street. This was reported by the…
A court in Baku sentenced Vardanyan as the ex-minister of state of the former unrecognized…
The car, which has undergone restoration after a long period of inactivity, is offered for…
Specialists from the Japanese company conducted endurance tests of the engine, forcing it to operate…